Resources

Technical Papers

58. Viscous Damper with Motion Amplification Device for High Rise Building Applications

Adding damping by the use of various damping devices has become an accepted method to reduce wind induced vibrations in tall buildings. An interesting example of a 39 story office tower is presented where large projected accelerations are the result of vortex shedding of an adjacent existing 52-story building. Viscous dampers and a toggle brace type motion amplification system are used to suppress the anticipated accelerations. A description of the damping system and its analytical simulation are discussed. This paper includes a nonlinear analysis of the tower, with time history forcing functions derived from wind tunnel testing. Cost data for the damper system is also presented.

Share This Post

More To Explore

White Paper

2. Bridge Design

This paper reports on a non-linear analysis of a bridge supported on sliding bearings with elastomeric restoring spring and viscous dampers. Results were verified with shake table tests.

Read More »
Case Study

10. Investigation of Light Pole Base Integrity – Rich Stadium

Light poles at Rich Stadium in Orchard Park, N.Y., were showing incipient failure of their hold-down bolts, due to wind excitation. This paper describes the measures used to alleviate this problem, including the addition of viscous dampers between the stadium structure and a point around one third up on the light poles.

Read More »

Thank You!

A Taylor Devices Representative will be in touch shortly.